ale/doc/ale-development.txt

444 lines
20 KiB
Plaintext

*ale-development.txt* For Vim version 8.0.
*ale-dev*
*ale-development*
ALE Development Documentation
===============================================================================
CONTENTS *ale-development-contents*
1. Introduction.........................|ale-development-introduction|
2. Design Goals.........................|ale-design-goals|
3. Coding Standards.....................|ale-coding-standards|
4. Testing ALE..........................|ale-development-tests|
4.1. Writing Linter Tests.............|ale-development-linter-tests|
4.2. Writing Fixer Tests..............|ale-development-fixer-tests|
4.3. Running Tests in a Windows VM....|ale-development-windows-tests|
===============================================================================
1. Introduction *ale-development-introduction*
This document contains helpful information for ALE developers, including
design goals, information on how to run the tests, coding standards, and so
on. You should read this document if you want to get involved with ALE
development.
===============================================================================
2. Design Goals *ale-design-goals*
This section lists design goals for ALE, in no particular order. They are as
follows.
ALE code should be almost 100% VimL. This makes the plugin as portable as
possible.
ALE should run without needing any other plugins to be installed, to make
installation simple. ALE can integrate with other plugins for more advanced
functionality, non-essential functionality, or improving on basic first party
functionality.
ALE should check files with as many tools as possible by default, except where
they cause security issues or make excessive use of resources on modern
machines.
ALE should be free of breaking changes to the public API, which is comprised of
documented functions and options, until a major version is planned. Breaking
changes should be preceded by a deprecation phase complete with warnings.
Changes required for security may be an exception.
ALE supports Vim 8 and above, and NeoVim 0.2.0 or newer. These are the
earliest versions of Vim and NeoVim which support |job|, |timer|, |closure|,
and |lambda| features. All ALE code should be written so it is compatible with
these versions of Vim, or with version checks so particular features can
degrade or fail gracefully.
Just about everything should be documented and covered with tests.
By and large, people shouldn't pay for the functionality they don't use. Care
should be taken when adding new features, so supporting new features doesn't
degrade the general performance of anything ALE does.
LSP support will become more important as time goes on. ALE should provide
better support for LSP features as time goes on.
When merging pull requests, you should respond with `Cheers! :beers:`, purely
for comedy value.
===============================================================================
3. Coding Standards *ale-coding-standards*
The following general coding standards should be adhered to for Vim code.
* Check your Vim code with `Vint` and do everything it says. ALE will check
your Vim code with Vint automatically. See: https://github.com/Kuniwak/vint
Read ALE's `Dockerfile` to see which version of `Vint` it uses.
* Try to write descriptive and concise names for variables and functions.
Names shouldn't be too short or too long. Think about others reading your
code later on.
* Use `snake_case` names for variables and arguments, and `PascalCase` names
for functions. Prefix every variable name with its scope. (`l:`, `g:`, etc.)
* Try to keep lines no longer than 80 characters, but this isn't an absolute
requirement.
* Use 4 spaces for every level of indentation in Vim code.
* Add a blank line before every `function`, `if`, `for`, `while`, or `return`,
which doesn't start a new level of indentation. This makes the logic in
your code easier to follow.
* End every file with a trailing newline character, but not with extra blank
lines. Remove trailing whitespace from the ends of lines.
* Write the full names of commands instead of abbreviations. For example, write
`function` instead of `func`, and `endif` instead of `end`.
* Write functions with `!`, so files can be reloaded. Use the |abort| keyword
for all functions, so functions exit on the first error.
* Make sure to credit yourself in files you have authored with `Author:`
and `Description:` comments.
In addition to the above general guidelines for the style of your code, you
should also follow some additional rules designed to prevent mistakes. Some of
these are reported with ALE's `custom-linting-rules` script. See
|ale-development-tests|.
* Don't leave stray `:echo` lines in code. Use `execute 'echo' ...` if you must
echo something.
* For strings use |is#| instead of |==#|, `is?` instead of `==?`, `isnot#`
instead of `!=#`, and `isnot?` instead of `!=?`. This is because `'x' ==# 0`
returns 1, while `'x' is# 0` returns 0, so you will experience fewer issues
when numbers are compared with strings. `is` and `isnot` also do not throw
errors when other objects like List or Dictionaries are compared with
strings.
* Don't use the `getcwd()` function in the ALE codebase. Most of ALE's code
runs from asynchronous callback functions, and these functions can execute
from essentially random buffers. Therefore, the `getcwd()` output is
useless. Use `expand('#' . a:buffer . ':p:h')` instead. Don't use
`expand('%...')` for the same reason.
* Don't use the `simplify()` function. It doesn't simplify paths enough. Use
`ale#path#Simplify()` instead.
* Don't use the `shellescape()` function. It doesn't escape arguments properly
on Windows. Use `ale#Escape()` instead, which will avoid escaping where it
isn't needed, and generally escape arguments better on Windows.
* Don't use the `tempname()` function. It doesn't work when `$TMPDIR` isn't
set. Use `ale#util#Tempname()` instead, which temporarily sets `$TMPDIR`
appropriately where needed.
* Use `snake_case` names for linter names, so they can be used as part of
variable names. You can define `aliases` for linters, for other names people
might try to configure linters with.
* Use |v:t_TYPE| variables instead of `type()`, which are more readable.
Apply the following guidelines when writing Vader test files.
* Use 2 spaces for Vader test files, instead of the 4 spaces for Vim files.
* If you write `Before` and `After` blocks, you should typically write them at
the top of the file, so they run for all tests. There may be some tests
where it make sense to modify the `Before` and `After` code part of the way
through the file.
* If you modify any settings or global variables, reset them in `After`
blocks. The Vader `Save` and `Restore` commands can be useful for this
purpose.
* If you load or define linters in tests, write `call ale#linter#Reset()` in
an `After` block.
* Just write `Execute` blocks for Vader tests, and don't bother writing `Then`
blocks. `Then` blocks execute after `After` blocks in older versions, and
that can be confusing.
Apply the following rules when writing Bash scripts.
* Run `shellcheck`, and do everything it says.
See: https://github.com/koalaman/shellcheck
* Try to write scripts so they will run on Linux, BSD, or Mac OSX.
===============================================================================
4. Testing ALE *ale-development-tests* *ale-dev-tests* *ale-tests*
ALE is tested with a suite of tests executed via GitHub Actions and AppVeyor.
ALE runs tests with the following versions of Vim in the following
environments.
1. Vim 8.0.0027 on Linux via GitHub Actions.
2. Vim 8.2.2401 on Linux via GitHub Actions.
3. NeoVim 0.2.0 on Linux via GitHub Actions.
4. NeoVim 0.4.4 on Linux via GitHub Actions.
5. Vim 8 (stable builds) on Windows via AppVeyor.
If you are developing ALE code on Linux, Mac OSX, or BSD, you can run ALEs
tests by installing Docker and running the `run-tests` script. Follow the
instructions on the Docker site for installing Docker.
See: https://docs.docker.com/install/
NOTE: Don't forget to add your user to the `docker` group on Linux, or Docker
just won't work. See: https://docs.docker.com/install/linux/linux-postinstall/
If you run simply `./run-tests` from the ALE repository root directory, the
latest Docker image for tests will be downloaded if needed, and the script
will run all of the tests in Vader, Vint checks, and several Bash scripts for
finding extra issues. Run `./run-tests --help` to see all of the options the
script supports. Note that the script supports selecting particular test files.
Once you get used to dealing with Vim and NeoVim compatibility issues, you
probably want to use `./run-tests --fast -q` for running tests with only the
fastest available Vim version, and with success messages from tests
suppressed.
Generally write tests for any changes you make. The following types of tests
are recommended for the following types of code.
* New/edited error handler callbacks -> Write tests in `test/handler`
* New/edited command callbacks -> Write tests in `test/command_callback`
* New/edited fixer functions -> Write tests in `test/fixers`
Look at existing tests in the codebase for examples of how to write tests.
Refer to the Vader documentation for general information on how to write Vader
tests: https://github.com/junegunn/vader.vim
See |ale-development-linter-tests| for more information on how to write linter
tests.
When you add new linters or fixers, make sure to add them into the tables in
supported-tools.md and |ale-supported-languages-and-tools.txt|. If you forget to
keep them both in sync, you should see an error like the following in the
builds run for GitHub Actions.
>
========================================
diff supported-tools.md and doc/ale-supported-languages-and-tools.txt tables
========================================
Differences follow:
--- /tmp/readme.qLjNhJdB 2018-07-01 16:29:55.590331972 +0100
+++ /tmp/doc.dAi8zfVE 2018-07-01 16:29:55.582331877 +0100
@@ -1 +1 @@
- ASM: gcc, foobar
+ ASM: gcc
<
Make sure to list documentation entries for linters and fixers in individual
help files in the table of contents, and to align help tags to the right
margin. For example, if you add a heading for an `aardvark` tool to
`ale-python.txt` with a badly aligned doc tag, you will see errors like so. >
========================================
Look for badly aligned doc tags
========================================
Badly aligned tags follow:
doc/ale-python.txt:aardvark ...
========================================
Look for table of contents issues
========================================
Check for bad ToC sorting:
Check for mismatched ToC and headings:
--- /tmp/table-of-contents.mwCFOgSI 2018-07-01 16:33:25.068811878 +0100
+++ /tmp/headings.L4WU0hsO 2018-07-01 16:33:25.076811973 +0100
@@ -168,6 +168,7 @@
pyrex (cython), ale-pyrex-options
cython, ale-pyrex-cython
python, ale-python-options
+ aardvark, ale-python-aardvark
autopep8, ale-python-autopep8
black, ale-python-black
flake8, ale-python-flake8
<
Make sure to make the table of contents match the headings, and to keep the
doc tags on the right margin.
===============================================================================
4.1 Writing Linter Tests *ale-development-linter-tests*
Tests for ALE linters take two forms.
1. Tests for handling the output of commands.
2. Tests for checking which commands are run, or connections are made.
Tests of the first form should go in the `test/handler` directory, and should
be written like so. >
Before:
" Load the file which defines the linter.
runtime ale_linters/filetype/linter_name_here.vim
After:
" Unload all linters again.
call ale#linter#Reset()
Execute(The output should be correct):
" Test that the right loclist items are parsed from the handler.
AssertEqual
\ [
\ {
\ 'lnum': 1,
\ 'type': 'E',
\ 'text': 'Something went wrong',
\ },
\ ],
\ ale_linters#filetype#linter_name#Handle(bufnr(''), [
\ '1:Something went wrong',
\ ]
<
Tests for what ALE runs should go in the `test/command_callback` directory,
and should be written like so. >
Before:
" Load the linter and set up a series of commands, reset linter variables,
" clear caches, etc.
"
" Vader's 'Save' command will be called here for linter variables.
call ale#assert#SetUpLinterTest('filetype', 'linter_name')
After:
" Reset linters, variables, etc.
"
" Vader's 'Restore' command will be called here.
call ale#assert#TearDownLinterTest()
Execute(The default command should be correct):
" AssertLinter checks the executable and command.
" Pass expected_executable, expected_command
AssertLinter 'some-command', ale#Escape('some-command') . ' --foo'
Execute(Check chained commands):
" GivenCommandOutput can be called with 1 or more list for passing output
" to chained commands. The output for each callback defaults to an empty
" list.
GivenCommandOutput ['v2.1.2']
" Given a List of commands, check all of them.
" Given a String, only the last command in the chain will be checked.
AssertLinter 'some-command', [
\ ale#Escape('some-command') . ' --version',
\ ale#Escape('some-command') . ' --foo',
\]
<
The full list of commands that will be temporarily defined for linter tests
given the above setup are as follows.
`GivenCommandOutput [...]` - Define output for ale#command#Run.
`AssertLinterCwd cwd` - Check the `cwd` for the linter.
`AssertLinter executable, command` - Check the executable and command.
`AssertLinterNotExecuted` - Check that linters will not be executed.
`AssertLSPLanguage language` - Check the language given to an LSP server.
`AssertLSPOptions options_dict` - Check the options given to an LSP server.
`AssertLSPConfig config_dict` - Check the config given to an LSP server.
`AssertLSPProject project_root` - Check the root given to an LSP server.
`AssertLSPAddress address` - Check the address to an LSP server.
===============================================================================
4.2 Writing Fixer Tests *ale-development-fixer-tests*
Tests for ALE fixers should go in the `test/fixers` directory, and should
be written like so. >
Before:
" Load the fixer and set up a series of commands, reset fixer variables,
" clear caches, etc.
"
" Vader's 'Save' command will be called here for fixer variables.
call ale#assert#SetUpFixerTest('filetype', 'fixer_name')
After:
" Reset fixers, variables, etc.
"
" Vader's 'Restore' command will be called here.
call ale#assert#TearDownFixerTest()
Execute(The default command should be correct):
" AssertFixer checks the result of the loaded fixer function.
AssertFixer {'command': ale#Escape('some-command') . ' --foo'}
Execute(Check chained commands):
" Same as above for linter tests.
GivenCommandOutput ['v2.1.2']
" Given a List of commands, check all of them.
" Given anything else, only the last result will be checked.
AssertFixer [
\ ale#Escape('some-command') . ' --version',
\ {'command': ale#Escape('some-command') . ' --foo'}
\]
<
The full list of commands that will be temporarily defined for fixer tests
given the above setup are as follows.
`GivenCommandOutput [...]` - Define output for ale#command#Run.
`AssertFixerCwd cwd` - Check the `cwd` for the fixer.
`AssertFixer results` - Check the fixer results
`AssertFixerNotExecuted` - Check that fixers will not be executed.
===============================================================================
4.3 Running Tests in a Windows VM *ale-development-windows-tests*
Tests are run for ALE in a build of Vim 8 for Windows via AppVeyor. These
tests can frequently break due to minor differences in paths and how escaping
is done for commands on Windows. If you are a Linux or Mac user, running these
tests locally can be difficult. Here is a process that will make that easier.
First, you want to install a Windows image with VirtualBox. Install VirtualBox
and grab a VirtualBox image for Windows such as from here:
https://developer.microsoft.com/en-us/microsoft-edge/tools/vms/
NOTE: If you need to enter a password for the virtual machine at any point,
the password is "Passw0rd!" without the double quotes.
NOTE: If your trial period for Windows runs out, run the commands like the
wallpaper tells you to.
Your virtual machine will need to have PowerShell installed. Before you go any
further, confirm that PowerShell is installed in your Windows virtual machine.
Consult the VirtualBox documentation on how to install "Guest Additions."
You probably want to install "Guest Additions" for most things to work
properly.
After you've loaded your virtual machine image, go into "Settings" for your
virtual machine, and "Shared Folders." Add a shared folder with the name
"ale", and set the "Folder Path" to the path to your ALE repository, for
example: "/home/w0rp/ale"
Find out which drive letter "ale" has been mounted as in Windows. We'll use
"E:" as the drive letter, for example. Open the command prompt as an
administrator by typing in `cmd` in the start menu, right clicking on the
command prompt application, and clicking "Run as administrator." Click "Yes"
when prompted to ask if you're sure you want to run the command prompt. You
should type in the following command to mount the "ale" directory for testing,
where "E:" is replaced with your drive letter. >
mklink /D C:\testplugin E:
<
Close the administrator Command Prompt, and try running the command
`type C:\testplugin\LICENSE` in a new Command Prompt which you are NOT running
as administrator. You should see the license for ALE in your terminal. After
you have confirmed that you have mounted ALE on your machine, search in the
Start Menu for "power shell," run PowerShell as an administrator, and issue
the following commands to install the correct Vim and Vader versions for
running tests. >
Add-Type -A System.IO.Compression.FileSystem
Invoke-WebRequest ftp://ftp.vim.org/pub/vim/pc/vim80-586w32.zip -OutFile C:\vim.zip
[IO.Compression.ZipFile]::ExtractToDirectory('C:\vim.zip', 'C:\vim')
rm C:\vim.zip
Invoke-WebRequest ftp://ftp.vim.org/pub/vim/pc/vim80-586rt.zip -OutFile C:\rt.zip
[IO.Compression.ZipFile]::ExtractToDirectory('C:\rt.zip', 'C:\vim')
rm C:\rt.zip
Invoke-WebRequest https://github.com/junegunn/vader.vim/archive/c6243dd81c98350df4dec608fa972df98fa2a3af.zip -OutFile C:\vader.zip
[IO.Compression.ZipFile]::ExtractToDirectory('C:\vader.zip', 'C:\')
mv C:\vader.vim-c6243dd81c98350df4dec608fa972df98fa2a3af C:\vader
rm C:\vader.zip
<
After you have finished installing everything, you can run all of the tests
in Windows by opening a Command Prompt NOT as an administrator by navigating
to the directory where you've mounted the ALE code, which must be named
`C:\testplugin`, and by running the `run-tests.bat` batch file. >
cd C:\testplugin
run-tests
<
It will probably take several minutes for all of the tests to run. Be patient.
You can run a specific test by passing the filename as an argument to the
batch file, for example: `run-tests test/test_c_flag_parsing.vader` . This will
give you results much more quickly.
===============================================================================
vim:tw=78:ts=2:sts=2:sw=2:ft=help:norl: