ale/doc/ale-go.txt

264 lines
9.5 KiB
Plaintext

===============================================================================
ALE Go Integration *ale-go-options*
===============================================================================
Integration Information
The `gometalinter` linter is disabled by default. ALE enables `gofmt`,
`golint` and `go vet` by default. It also supports `staticcheck`, `go
build`, `gosimple`, `golangserver`.
To enable `gometalinter`, update |g:ale_linters| as appropriate:
>
" Enable all of the linters you want for Go.
let g:ale_linters = {'go': ['gometalinter', 'gofmt']}
<
A possible configuration is to enable `gometalinter` and `gofmt` but paired
with the `--fast` option, set by |g:ale_go_gometalinter_options|. This gets you
the benefit of running a number of linters, more than ALE would by default,
while ensuring it doesn't run any linters known to be slow or resource
intensive.
g:ale_go_go_executable *g:ale_go_go_options*
*b:ale_go_go_options*
Type: |String|
Default: `'go'`
The executable that will be run for the `gobuild` and `govet` linters, and
the `gomod` fixer.
g:ale_go_go111module *g:ale_go_go111module*
*b:ale_go_go111module*
Type: |String|
Default: `''`
Override the value of the `$GO111MODULE` environment variable for
golang tools.
===============================================================================
bingo *ale-go-bingo*
g:ale_go_bingo_executable *g:ale_go_bingo_executable*
*b:ale_go_bingo_executable*
Type: |String|
Default: `'bingo'`
Location of the bingo binary file.
g:ale_go_bingo_options *g:ale_go_bingo_options*
*b:ale_go_bingo_options*
Type: |String|
Default: `''`
===============================================================================
gobuild *ale-go-gobuild*
g:ale_go_gobuild_options *g:ale_go_gobuild_options*
*b:ale_go_gobuild_options*
Type: |String|
Default: `''`
This variable can be set to pass additional options to the gobuild linter.
They are injected directly after "go test".
===============================================================================
gofmt *ale-go-gofmt*
g:ale_go_gofmt_options *g:ale_go_gofmt_options*
*b:ale_go_gofmt_options*
Type: |String|
Default: `''`
This variable can be set to pass additional options to the gofmt fixer.
===============================================================================
golangci-lint *ale-go-golangci-lint*
`golangci-lint` is a `lint_file` linter, which only lints files that are
written to disk. This differs from the default behavior of linting the buffer.
See: |ale-lint-file|
g:ale_go_golangci_lint_executable *g:ale_go_golangci_lint_executable*
*b:ale_go_golangci_lint_executable*
Type: |String|
Default: `'golangci-lint'`
The executable that will be run for golangci-lint.
g:ale_go_golangci_lint_options *g:ale_go_golangci_lint_options*
*b:ale_go_golangci_lint_options*
Type: |String|
Default: `'--enable-all'`
This variable can be changed to alter the command-line arguments to the
golangci-lint invocation.
g:ale_go_golangci_lint_package *g:ale_go_golangci_lint_package*
*b:ale_go_golangci_lint_package*
Type: |Number|
Default: `0`
When set to `1`, the whole Go package will be checked instead of only the
current file.
===============================================================================
golangserver *ale-go-golangserver*
g:ale_go_langserver_executable *g:ale_go_langserver_executable*
*b:ale_go_langserver_executable*
Type: |String|
Default: `'go-langserver'`
Location of the go-langserver binary file.
g:ale_go_langserver_options *g:ale_go_langserver_options*
*b:ale_go_langserver_options*
Type: |String|
Default: `''`
Additional options passed to the go-langserver command. Note that the
`-gocodecompletion` option is ignored because it is handled automatically
by the |g:ale_completion_enabled| variable.
===============================================================================
golint *ale-go-golint*
g:ale_go_golint_executable *g:ale_go_golint_executable*
*b:ale_go_golint_executable*
Type: |String|
Default: `'golint'`
This variable can be set to change the golint executable path.
g:ale_go_golint_options *g:ale_go_golint_options*
*b:ale_go_golint_options*
Type: |String|
Default: `''`
This variable can be set to pass additional options to the golint linter.
===============================================================================
gometalinter *ale-go-gometalinter*
`gometalinter` is a `lint_file` linter, which only lints files that are
written to disk. This differs from the default behavior of linting the buffer.
See: |ale-lint-file|
g:ale_go_gometalinter_executable *g:ale_go_gometalinter_executable*
*b:ale_go_gometalinter_executable*
Type: |String|
Default: `'gometalinter'`
The executable that will be run for gometalinter.
g:ale_go_gometalinter_options *g:ale_go_gometalinter_options*
*b:ale_go_gometalinter_options*
Type: |String|
Default: `''`
This variable can be changed to alter the command-line arguments to the
gometalinter invocation.
Since `gometalinter` runs a number of linters that can consume a lot of
resources it's recommended to set this option to a value of `--fast` if you
use `gometalinter` as one of the linters in |g:ale_linters|. This disables a
number of linters known to be slow or consume a lot of resources.
g:ale_go_gometalinter_lint_package *g:ale_go_gometalinter_lint_package*
*b:ale_go_gometalinter_lint_package*
Type: |Number|
Default: `0`
When set to `1`, the whole Go package will be checked instead of only the
current file.
===============================================================================
gopls *ale-go-gopls*
g:ale_go_gopls_executable *g:ale_go_gopls_executable*
*b:ale_go_gopls_executable*
Type: |String|
Default: `'gopls'`
Location of the gopls binary file.
g:ale_go_gopls_options *g:ale_go_gopls_options*
*b:ale_go_gopls_options*
Type: |String|
Default: `''`
===============================================================================
govet *ale-go-govet*
g:ale_go_govet_options *g:ale_go_govet_options*
*b:ale_go_govet_options*
Type: |String|
Default: `''`
This variable can be set to pass additional options to the go vet linter.
===============================================================================
revive *ale-go-revive*
g:ale_go_revive_executable *g:ale_go_revive_executable*
*b:ale_go_revive_executable*
Type: |String|
Default: `'revive'`
This variable can be set to change the revive executable path.
g:ale_go_revive_options *g:ale_go_revive_options*
*b:ale_go_revive_options*
Type: |String|
Default: `''`
This variable can be set to pass additional options to the revive
===============================================================================
staticcheck *ale-go-staticcheck*
g:ale_go_staticcheck_options *g:ale_go_staticcheck_options*
*b:ale_go_staticcheck_options*
Type: |String|
Default: `''`
This variable can be set to pass additional options to the staticcheck
linter.
g:ale_go_staticcheck_lint_package *g:ale_go_staticcheck_lint_package*
*b:ale_go_staticcheck_lint_package*
Type: |Number|
Default: `0`
When set to `1`, the whole Go package will be checked instead of only the
current file.
===============================================================================
vim:tw=78:ts=2:sts=2:sw=2:ft=help:norl: